网站标志
自定内容
台州市黄岩康凡模具有限公司
全站搜索
搜索
导航菜单
当前位置
顶部菜单
图片
导航菜单
自定内容
技术博客
自定内容
文章正文
Draft Angle
作者:管理员    发布于:2018-05-21 16:56:17    文字:【】【】【

So that parts can be easily ejected from the mold, walls should be designed with a slight draft angle, as shown in the Exaggerated Draft Angle illustration. A draft angle of 1/2° draft per side is the extreme minimum to provide satisfactory results.

1° draft per side is considered standard practice. The smaller draft angles cause problems in removing completed parts from the mold. However, any draft is better than no draft at all.

Parts with a molded-in deep texture, such as leather-graining, as part of their design require additional draft. Generally, an additional 1° of draft should be provided for every 0.025 mm depth of texture.

自定内容

版权所有 © Copyright 2009-2010 台州市黄岩康凡模具有限公司

技术支持:浙江七米